How To Remove A Plastic Shower Drain Cover?

How do I remove a glued PVC shower drain?

If you have a glue style shower drain you will have to cut it off. Most hardware and plumbing supply stores have whats called a inside pipe cutter. Put it in your screw gun, insert into pipe and cut away the drain. Once it is removed you can place a coupling and short peice of pipe and its just like new.

How do you remove an old drain cover?

Insert the tip of the screwdriver through an opening in the cover and lift up. For a snap in cover, spray lubricant along the edges of it as well. Let it settle down into the threads. Insert the needle-nose pliers into the openings of the drain cover, firmly grip the pliers, twist it towards the left, and pull it out.

Will drain cleaner eat through plastic?

The drain cleaner can eat through the plastic, allowing the caustic chemical outside of the pipe and onto other surfaces, even if you thoroughly rinse the pipe after using the chemical.

Are shower drains glued in?

Like compression drains, glue-on drains are also available as ABS or PVC. Most drains are made to fit a two-inch drain pipe, which is standard for most stand-alone showers. A two-inch pipe is more common because it allows water to drain more quickly, which is essential when you have a shower pan (rather than a tub).

You might be interested:  Question: How To Remove Scratches From Plastic Lenses On Eyeglasses?

Can you take apart glued PVC pipe?

Cutting back the PVC pipe to a new point is actually the best way to separate PVC pipes and remove the glue. Professional plumbers usually will cut away PVC pipe rather than try to separate it. PVC pipe is soft and easy to cut. Use a hacksaw or a PVC pipe cutter to cut off the section you would like to separate.

How do you clean a shower drain cover?

Mix together 1 cup of vinegar (distilled white vinegar works best) and 1 cup of baking soda. First, pour boiling water down the drain to loosen; then follow with the baking soda-vinegar mixture and wait 15 minutes. Rinse with more boiling water.

What are the different types of shower drains?

The Types of Shower Drains [7 Types and Styles]

  • Point Drains.
  • Linear Drains.
  • Decorative Drain or Hidden Drain.
  • Single-Piece Drain.
  • Multi-Piece Shower Drain.
  • Shower Drain Finish and Style.
  • Tileable Drain Grate.

How do you clean a shower drain that can’t be removed?

Simply pour in 1/4C baking soda, followed by 1C white vinegar. Let fizz for 15-20 minutes, then pour a large pot of boiling water directly into the drain. Sometimes clogs get stuck where you can’t see, and a plunger can get them moving.

How do you remove an old shower drain?


  1. Remove drain cover with flat blade screwdriver.
  2. Remove the crown nut by unthreading it using needle nose pliers.
  3. Extract the compression seal exposing drain pipe and shower drain body.
  4. With mini hacksaw, make two vertical cuts approximately 1” apart through drain body.

Leave a Reply

Your email address will not be published. Required fields are marked *